![]() Make sure the key is fully inserted: Ensure that the key is fully inserted into the lock mechanism and turned in the correct direction to lock the safe. If the bolts are not fully retracted, this can prevent the locking mechanism from engaging. Ensure the locking bolts are fully retracted: Before trying to lock your safe, ensure that the locking bolts are fully retracted into the safe door. Here are some steps you can try to resolve the issue: If you are unable to lock your safe with the key, there may be a few reasons why this is happening. You will need to consult the DVR system's manual for instructions on how to configure the system to use the new hard drive. Once the format is complete, the hard drive will be ready for use with your DVR system.Choose the file system you want to use for the partition (NTFS is recommended for use with a DVR system) and select the option to perform a quick format.Once the partition has been created, right-click on it again and select the option to format the partition.Select the option to create a new partition, and specify the size of the partition you want to create.In the Disk Management utility, locate the new hard drive and right-click on it.This can be found in the Control Panel under Administrative Tools. ![]() Open the Disk Management utility on your computer.Connect the hard drive to your computer using a SATA cable.To format a hard drive for use with a DVR system, you will need to connect the drive to a computer and use a disk management utility to create a new partition and format the drive.
0 Comments
Leave a Reply. |